Print Page | Close Window

normally open switch

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95046
Printed Date: May 16, 2024 at 3:11 AM


Topic: normally open switch

Posted By: dea,can
Subject: normally open switch
Date Posted: June 23, 2007 at 3:28 AM

need to know how to wire a normally open switch its for engine safety switch onboard honda its a billygoat vacuum so when the cutter door is open it kills the motor.thanks



-------------
dragon



Replies:

Posted By: hotwaterwizard
Date Posted: June 26, 2007 at 12:25 AM

Does the motor have a kill switch?

posted_image



-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !




Posted By: hotwaterwizard
Date Posted: June 26, 2007 at 12:49 AM

Here is the owners manual  https://www.parish-supply.com/pdf/Billy-Goat-MV-Manual.pdf

Simple Just hook it across the Bag Switch.

Or one to ground and the other to the kill.

posted_image



-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !




Posted By: hotwaterwizard
Date Posted: June 26, 2007 at 7:52 AM

This switch is actually considered to be a normally Closed switch.

It is closed when it is not pushed in and it is spring loaded.

posted_image



-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !




Posted By: hotwaterwizard
Date Posted: July 16, 2007 at 8:48 AM
Did dea,can Get this? ><<>

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !





Print Page | Close Window