ok i have a bulldog deluxe 500 with timed outputs (3) my windows and sunroof are already protected by current sense through factory wiring so i pretty much have no need for a window module. I already have my windows wired in with 1 aux output for (all up) and 1 aux output for all down timed great and i even had a guinny pig stick his arm in the window to see the current sense worked (lucky him it did) now to the question.... i only have 1 aux output left and would like to be able to open and close my sunroof with just 1 timed output can anyone help me out with a diagram on how to do this or if it is even possible? I am sorry if this has been covered i have searched high and low (which is kinda leading me to believe its not possible??)
Thanks in advance 519civiconair
-------------
F.B.S.S air ride is the only way to roll
why dont you just use those same outputs to open/close the sunroof along with the windows? I would think that would be quite a bit easier. I would also do a search, b/c I know I have seen it on here before.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Thanks for the reply i guess i should have been more specific.... I want a seperate output for windows and sunroof (Just in case say im inside and it starts raining my sunroof is open but not my windows) if i had it hooked up together the windows would be like your holding all the switches on the whole time... and it takes twice as long to open the windows a it does to open the sunroof so the sunroof would be like your holding the switch on for twice as long a nessasary.... would this not eventually do harm??
-------------
F.B.S.S air ride is the only way to roll