last one for a while, i promise

Printed From: the12volt.com
Forum Name: New Ideas for the12volt.com
Forum Discription: Tells us what you'd like to see on the12volt.com.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114652
Printed Date: May 01, 2025 at 9:18 AM

Topic: last one for a while, i promise

Posted By: i am an idiot
Subject: last one for a while, i promise
Date Posted: June 23, 2009 at 10:06 PM

it is not a big deal, but I have in the past tried to send a private message to a user that had a full PM box. I know now to look for this, but if you could change the appearance of the message that says your message was not delivered because the user's message box is full. Maybe put NOT DELIVERED in some larger text. I promise, I am done for a while.

Replies:

Posted By: the12volt
Date Posted: June 23, 2009 at 10:23 PM

Done ;-)

-------------
posted_image

the12volt • Support the12volt.com

Posted By: i am an idiot
Date Posted: June 23, 2009 at 10:26 PM

Thanks, I have sent the same message multiple times. Went to my outbox and noticed they were not there. Then I paid attention and noticed the message. Thanks again. And thanks for the new Bling.

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: i am an idiot
Date Posted: August 09, 2009 at 9:15 PM

OK I lied. But at least I didn't start a new topic. Could we get some scissors on the following picture. I have seen in alarm manuals, they have a pair of scissors where the wire is to be cut. I know where it needs to be cut, Our installers know where it is to be cut. But not so sure about our DIYers

https://www.the12volt.com/installbay/forum_posts.asp~TID~115557~get~last#561427

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Print Page | Close Window