sticky on xover and impedances

Printed From: the12volt.com
Forum Name: New Ideas for the12volt.com
Forum Discription: Tells us what you'd like to see on the12volt.com.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98004
Printed Date: May 03, 2024 at 10:29 AM

Topic: sticky on xover and impedances

Posted By: jmelton86
Subject: sticky on xover and impedances
Date Posted: October 15, 2007 at 11:13 PM

I think there should be a sticky on xovers and how impedance affects them. This seems to come up quite often. It's easy to think that a 4ohm tweeter and a 4ohm woofer (even though they both have xovers on them), b/c they are wired in 'parallel', would load the amp to 2ohms.

Think this idea is okay? I couldn't write one up, but I think it could be considered.

-Thanks.

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Replies:

Posted By: the12volt
Date Posted: October 15, 2007 at 11:16 PM

https://www.the12volt.com/caraudio/cross.asp

-------------
posted_image

the12volt • Support the12volt.com

Posted By: jmelton86
Date Posted: October 15, 2007 at 11:29 PM

Um, okay. Thanks anyway posted_image

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Posted By: the12volt
Date Posted: October 15, 2007 at 11:49 PM

You're welcome anyway ;) Take some time to explore this site beyond the forum and you'll see that it contains a lot more than just a forum.

-------------
posted_image

the12volt • Support the12volt.com

Print Page | Close Window