Does anyone have the alarm/remote start wiring for a 2000 Mercedes E320 sedan? I am looking for the directechs wiring info if possible. Audiovox does not have any info and I already have the bulldogsecurity.com wiring. I prefer the directechs wiring info though.
Also, is there anything special I need to know about this vehicle? Please include all notes and diagrams if they are available.
Thank you in advance for the help. I appreciate it.
Wire/Function Colour Location / Description Polarity
PASSIVE ANTI-THEFT YES TRANSPONDER SEE NOTES
12 VOLTS Red Ignition switch harness +
IGNITION Pink/red Ignition switch harness +
IGNITION 2 Pink / YELLOW Ignition switch harness +
ACCESSORY Pink/green Ignition switch harness +
STARTER Purple Ignition switch harness +
TACH SIGNAL Use fuel injector
LOCK Black In passenger side kickpanel -
UNLOCK Blue In passenger side kickpanel -
DOORPIN SEE NOTES
All 4 doors are separate circuits. BROWN / GRAY is left front, BROWN / RED is right front, BROWN / GREEN is left rear and BROWN / BLACK is right rear. All 4 wires are located at the PSE module under the rear seat on the passenger side.
HOODPIN BROWN / red At pinswitch behind left headlight -
TRUNK PIN BROWN / yellow AT PSE module under rear seat -
TRUNK RELEASE Violet At release switch in dash -
FACTORY ARM Arms with lock wire
FACTORY DISARM Disarms with unlock wire
BRAKESWITCH BLACK/ red At switch above brake pedal +
PARKLIGHTS Gray/red & Gray/black At light switch harness +
posted_image Both wire must be used and isolated with relays.
REVERSE LIGHTS Gray / YELLOW DKP in harness to rear of vehicle +
DIMMER Gray/blue At any illuminated dash switch +
VSS WIRE GREEN/ black Radio harness AC
posted_image Available Notes
Vehicle Notes
PLEASE NOTE: This vehicle is equipped with a TRANSPONDER passive anti-theft system. See the supplied diagram for remote start installation.
5BC_immobilizer_bypass.pdf door_locks.pdf isolating_independent_park_light_wires.pdf -------------