power lock operation on 06, 07 azeras
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100752
Printed Date: May 02, 2025 at 4:46 PM
Topic: power lock operation on 06, 07 azeras
Posted By: gcarterh
Subject: power lock operation on 06, 07 azeras
Date Posted: January 04, 2008 at 4:07 PM
I am still having problems getting the power locks in the '06 and '07 Hyundai Azera to work when installing remote start/entry. The last time I posted, someone was kind enough to furnish me with a diagram from Directed Electronics on how to wire the locks correctly. However, I tried the diagram (and checked it 3 times to make sure I had it wired as in the diagram) and now the locks work fine but it still won't unlock the doors when they are all locked. If I unlock just the driver's door (manually, with a key, with a factory remote, it doesn't matter), then I can get the other 3 doors to unlock by pressing the unlock button. What am I missing??? GLENN ------------- Glenn
Replies:
Posted By: mikvot
Date Posted: January 07, 2008 at 9:01 PM
Try setting the door locks on the system to double pulse.
-------------
Posted By: gcarterh
Date Posted: January 08, 2008 at 8:21 AM
Yes, I forgot to mention I have set the RS door unlock to double pulse. It still didn't make a difference. Could it be that the gray/black wire needs to be pulsed first and then the pink wire needs to be pulsed (separately)? How would a person do that? Thanks for any help in advance. ------------- Glenn
Posted By: mikvot
Date Posted: January 08, 2008 at 8:39 PM
When you unlock with the aftermarket tx, is the relay you have wired up clicking? Basically all that the relay is doing is opening up the grey/black wire during unlock, so it has to be pulsed at the same time as the unlock wire.
-------------
Posted By: gcarterh
Date Posted: January 09, 2008 at 10:46 AM
According to the diagram I received previously, the relay is only suppose to come in to play when the lock pulse is used. When I lock the car, the relay clicks to open the gray/black wire but the diagram shows to ground pulse the (clsoed) gray/black wire and the pink wire at the same time, these two wires being separated by diodes. Is the gray/black wire supposed to be open during the unlock operation also? Thanks.
-------------
Glenn
Posted By: mikvot
Date Posted: January 09, 2008 at 8:11 PM
No, you're right....i was looking at it wrong for some reason. So have you disconnected the unlock from the alarm, and just went to a straight ground? I don't see anything else that would prevent this thing from unlocking....i'm sure you have checked your diodes......not sure what to tell you.
-------------
|