93 Honda Accord Wiring - CS2011RS

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1028
Printed Date: May 03, 2025 at 6:01 PM

Topic: 93 Honda Accord Wiring - CS2011RS

Posted By: slappe
Subject: 93 Honda Accord Wiring - CS2011RS
Date Posted: May 30, 2002 at 12:45 AM

Hi! I have a 93 honda accord SE and a CS2011RS (crimestopper) alarm/remote starter. i havent really jumped into installing this yet, other than reading the installation instructions. i think i am going to be needing wiring schematics for my car, unless someone has already installed this alarm on a 93 honda accord before and would be willing to help me out. the install manual is here

https://www.crimestopper.com/techweb/InstructionBooks/Alarm/cs2011-install-2.pdf

One of the first questions i came up with is... "Connect to the negative horn trigger wire usually located near the steering column. If the vehicle horn circuit requires +12V, then a relay is required" does a honda accord require +12V for the horn circuit? well, if i used my handy-dandy multimeter and ever found the wire, i could test it myself i guess. maybe thats not such a good question afterall :P

okay - i guess i want to know if anyone else has done this install before, and if they have, do they have any comments or "words to the wise" before i start ripping my car apart. im a new installer, but i do enjoy projects such as these, and think i should be able to have this thing working quite well, with a little bit of help. i appreciate anything useful that you would be willing to share.

-------------
-SlappE

Replies:

Posted By: Velocity Motors
Date Posted: May 30, 2002 at 5:00 AM

Honda

Accord

1990-1993

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #1:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #2:	YELLOW	IGNITION SWITCH HARNESS (HEATER)
Ignition #3:	N/A
Accessory:	WHITE/ BLACK	IGNITION SWITCH HARNESS
Brake Light:	GREEN / WHITE (+)	AT SWITCH,BRACKET ABOVE PEDAL BRACKET
Tach Signal:	BLUE	AT DISTRIBUTOR OR DASH FUSE BLOCK
Parking Lights:	BLACK/ RED (+)	HEADLIGHT SWITCH OR AT FUSE BOX
Headlights:	BLUE/RED	(-) AT HEADLIGHT SWITCH
OEM Alarm Disarm:	BLUE OR BLUE/WHITE	(-) AT DIS-ARM SWITCH
OEM Alarm Arm:	N/A
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:

Honda

Accord

1990-1993

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		WHITE	IGNITION SWITCH HARNESS
Starter Kill:		BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition +12 Volts:		BLACK / YELLOW	IGNITION SWITCH HARNESS
Dome Lights/Superv:		BLACK/ WHITE (-)	BROWN CONNECTOR ABOVE FUSE PANEL
OEM Horn:		BLUE/RED OR GRAY	(-) STEERING COLUMN HARNESS
Power Lock:		BLACK/ WHITE	DRIVER KICK PANEL, 2 PIN PLUG TAPPED
Power Unlock:		BLACK/ RED	TO HARNNESS ABOVE FUSE BOX *
Trunk Release:		N/A
Alarm Input Wire:		BLACK/ WHITE (-)	BROWN CONNECTOR ABOVE FUSE PANEL
Notes:	* See Note #201 - Negative Pulse Door Lock Diagram.

Very basic installation. Make sure that you check the circuit for (-) or (+) input or output and only place the fuse in last just before you try the system out.
Open one window in the car before you start the install ( don't want to lock yourself out while testing door locks

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: slappe
Date Posted: May 30, 2002 at 9:47 AM

Thank you thank you. I hope it goes well, but im sure ill be back w/ some more questions. Thanks.

-------------
-SlappE