Print Page | Close Window

99 integra lock acutator removal

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103674
Printed Date: May 03, 2025 at 7:21 PM


Topic: 99 integra lock acutator removal

Posted By: adhuot01
Subject: 99 integra lock acutator removal
Date Posted: April 03, 2008 at 12:34 PM

I am looking for suggestions on how to disengage the outside door handle-to-latch rod and outside door lock-to-latch rod from the latch assembly inside the driver side door. I have tried to remove the assembley from the door, however I just can't sqeeze my hand or any of my tools between the assembley and the outside door panel to remove those 2 rods. It is difficult working through that small access hole. What is the proper procedure?

-------------
Andy Huot



Replies:

Posted By: KarTuneMan
Date Posted: April 03, 2008 at 1:52 PM

Did you get the glass out of the way first? 2 10mm's on the bottom of the glass, and it slides rite out. Then remove the outside door handle.

Then think skinny, it's a tight squeeze, but thats how it's done. On ward, and up ward my friend.



-------------


Print Page | Close Window