2009 Dodge Journey Alarm Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104559
Printed Date: April 23, 2024 at 12:51 PM
Topic: 2009 Dodge Journey Alarm Wiring
Posted By: VSMTrigger
Subject: 2009 Dodge Journey Alarm Wiring
Date Posted: May 07, 2008 at 10:38 PM
Hey guys. Im gonna attempt to install a Viper 160XV remote start on a 2009 Dodge Journey and was wandering if anyone has the wiring info that I need. Thanks.
Replies:
Posted By: VSMTrigger
Date Posted: May 07, 2008 at 10:40 PM
^^^^^wondering.....sorry
Posted By: offroadzj
Date Posted: May 07, 2008 at 10:58 PM
i am unsure as to that specific vehicle, but most new chrysler vehicles require pulling the ignition box apart and soldering directly to the circuit board. I would definately look into getting ahold of the data bypass for the vehicle to make things and heck of a lot easier. Sorry for the lack of info, but every little bit can help
Kenny
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: hydroz_23
Date Posted: May 07, 2008 at 11:15 PM
this car does have the new style ignition. pretty easy if you have the module(s) you can use a idatalink module with ring or a xk06 and a pku-ch2 but only the idatalink will do locks and security functions. either way will require at least 3 wires soldered onto circuit board in ignition. idatalink requires 4.
12volts light blue/red ign. harness
ignition pink/white ign. harness
parking lights(+) WHITE/ purple driver kick panel
domelight(+) yellow/white driver kick panel
lock(-)330 ohm PURPLE / green harness above gas pedal
unlock(-)100 ohm PURPLE / green harness above gas pedal
horn(-) GREEN/ purple horn switch
brake(+) GREEN / WHITE or green brake switch
Posted By: VSMTrigger
Date Posted: May 08, 2008 at 1:28 AM
The only modules I have at my disposal are the XK06 and the 556U (DEI). I know im going to loose a key with the 556U, but do you think i can get it to work with these parts?
When using these parts together will i have to diode isolate the status output wires (gwr) when connecting them to the alarm brain?
Thanks hydroz_23 and offroadzj for your input.
Posted By: hydroz_23
Date Posted: May 08, 2008 at 9:25 AM
VSMTrigger wrote:
The only modules I have at my disposal are the XK06 and the 556U (DEI). I know im going to loose a key with the 556U, but do you think i can get it to work with these parts?
When using these parts together will i have to diode isolate the status output wires (gwr) when connecting them to the alarm brain?
Thanks hydroz_23 and offroadzj for your input.
yes a 556u will work
|