2007 dodge caliber radio wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104746
Printed Date: May 14, 2025 at 2:16 AM
Topic: 2007 dodge caliber radio wiring
Posted By: rusty217
Subject: 2007 dodge caliber radio wiring
Date Posted: May 14, 2008 at 8:34 PM
I've seen this already:
Radio 12v RED / lt. blue
Radio Ground BLACK / YELLOW
Radio Ignition (CAN data bus)
Radio Illumination N/A
Factory Amp Turn-on (CAN data bus)
Power Antenna gray/red
LF Speaker +/- gray/purple - gray / YELLOW
RF Speaker +/- dk. GREEN/ pur - dk. GREEN/ yel
LR Speaker +/- dk. grn/dk. blue - dk. grn/brn
RR Speaker +/- gray/dk. blue - gray/orange
my question is; besides running a wire to the fuse box, is there another way to get a radio ignition switch wired? The aftermarket radio I'm putting in has a red wire for the ignition switch power and a yellow for the battery power -- I could wire both to each one of the Radio 12V, but this leaves the radio ON, with me manually turning it on and off, regardless if the car is on or off.
I'm sort of a 'tard when it comes to these things, so please "dumb it down" for me. (By the way, what is the CAN data bus? (see I am a 'tard)).
Replies:
Posted By: rusty217
Date Posted: May 14, 2008 at 8:37 PM
One last thing, is there a 'Dimmer'? I see the other has N/A for radio illimuniation, I have an ORANGE wire for "Radio Dimmer", where's this go?
|