infiniti qx56, mini cooper door triggers

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104880
Printed Date: May 07, 2024 at 1:20 PM

Topic: infiniti qx56, mini cooper door triggers

Posted By: UUUU2c
Subject: infiniti qx56, mini cooper door triggers
Date Posted: May 20, 2008 at 10:59 PM

Does anyone know where I could get the Infiniti QX56 and Mini Cooper door trigger voltages when the door is open and when it is closed? I am trying to install alarm/starters for these cars (unknown brand) and it seems that the control modules cannot sense when the doors are open and/closed. I just want to make sure that the vehicles' voltages are within specifications.

Thanks for any help.

Replies:

Posted By: kola7126
Date Posted: May 31, 2008 at 1:59 PM

QX56	2004 -2007

LEFT FRONT DOOR TRIGGER IS LIGHT BLUE(-) IN PIN47 .THE RIGHT FRONT DOOR TRIGGER IS RED / BLUE(-) IN PIN 12 . THE LEFT REAR DOOR TRIGGER IS RED / YELLOW(-) IN PIN 48 THE RIGHT REAR DOOR TRIGGER IS RED / WHITE OR GRAY(-) IN PIN 13 .WHEN CONNECTING TO AN ALARM SYSTEM, USE ALL 4 DOOR TRIGGER WIRES AND DIODE ISOLATE. TO CONNECT

COOPER

2004 -2007

The DRIVERS DOOR Trigger wire is a BROWN / GRAY / YELLOW (-) and the PASSENGER DOOR Trigger is a BROWN / GRAY / YELLOW (-). When connecting to an Alarm System, use both wires and DIODE ISOLATE@ GMCU, BLACK Plug, Pins 22 and 42, The GMCU Module is located on the PASSENGER KICK PANEL.

Posted By: UUUU2c
Date Posted: June 06, 2008 at 12:14 PM

Thanks for the reply. However, I need to know the actual door trigger voltages (open and closed) to see if there is a problem with the cars.

Any help would be appreciated.