2005 2008 ford crown vic door trigger?

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105552
Printed Date: July 05, 2025 at 8:08 AM

Topic: 2005 2008 ford crown vic door trigger?

Posted By: ls@pcs
Subject: 2005 2008 ford crown vic door trigger?
Date Posted: June 18, 2008 at 1:39 PM

Hi , I need some help here . We are working on A bunch of 2005 and newer Crown Vics . We need the driver door trigger wire to trigger a function on our video system . All the info I have found tells me it's dark blue and inside the door . But it's not triggering our function right . Is this wire a low voltage trigger ? Do we need to use a relay ???? Any help would be GREATLY appreciated !!!!

Thank You .

Replies:

Posted By: Big Dog
Date Posted: June 23, 2008 at 10:04 AM

No need to go inside door, no relays required.

You'll find the driver's door trigger down low in driver's kick in a brown plug. It's dark blue and will give a solid "negative" signal when the door's open.

The other three doors are common on a BLACK/ orange found under the drivers door sill plate. Also negative trigger.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: ls@pcs
Date Posted: June 23, 2008 at 2:49 PM

And this is on 05 and newer Crown vics ?

I looked in the kick panel and could not find the dark blue any where . I could only find it inside the door going into the door module .

Print Page | Close Window