Print Page | Close Window

power window

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106290
Printed Date: April 27, 2024 at 7:30 PM


Topic: power window

Posted By: poker123
Subject: power window
Date Posted: July 22, 2008 at 3:07 AM

I'm installing power windows in my 2001 tacoma. Does anyone have a diagram of the wiring I will need to connect to a hot wire? Is there a particular wire that I need to use or will any hot wire under the steering wheel column be sufficient? Is there any things in particular that I need to look out for while installing this motor and hardware or is it pretty much self explained. Thanks



Replies:

Posted By: kola7126
Date Posted: July 22, 2008 at 7:00 AM
Cigar lighter wires can be used/




Posted By: Phreak480
Date Posted: July 22, 2008 at 7:38 AM
why not check for an unused fuse position in the factory block. sometimes you can get lucky and find a position that is wired even though you dont have the option it would power, such as windows, power seats, etc. might be worth doing some digging around as the cigar lighter sockets usually have rather wimpy wires and arent made to stand up to heavy current demands. a little work now can save you alot of aggravation later





Print Page | Close Window