Print Page | Close Window

2006 Lincoln Navigator Stereo/Alarm Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106834
Printed Date: March 29, 2024 at 4:45 AM


Topic: 2006 Lincoln Navigator Stereo/Alarm Wiring

Posted By: hoppin62
Subject: 2006 Lincoln Navigator Stereo/Alarm Wiring
Date Posted: August 16, 2008 at 11:25 PM

Does anyone have a diagram for my 2006 Navigator? I have factory navigation, flip down tv/dvd player, premiun sound with amplifier. I tried to install my Kenwwod unit with a harness I had from my 2004 Navigator, but it only powered on he Kenwood, but no sound!Any help would be appreciated.

Thanks!



Replies:

Posted By: i am an idiot
Date Posted: August 16, 2008 at 11:38 PM
Was there a power antenna wire on the harness that plugged into the vehicle harness? If so did you connect it to the amp remote wire of the Deck?




Posted By: hoppin62
Date Posted: August 17, 2008 at 1:01 AM
i am an idiot wrote:

Was there a power antenna wire on the harness that plugged into the vehicle harness? If so did you connect it to the amp remote wire of the Deck?


Yes I did, but I just noticed that where I have my 4 wires that are speaker outputs on my harness from the deck.... those pins on the harness from the dash are empty! Maybe I need more than one harness from my deck to the dash! My factory radio has 4 harnesses (1 big one and 4 smaller ones) I'm confused!




Posted By: i am an idiot
Date Posted: August 17, 2008 at 5:43 AM
Does one of the now empty harnesses have 8 pins on it?  If so it appears as though it is the input plug for the premium sound amplifier.  There is a harness available to make those connections.  Metra 70-5521 is the number for said plug.   Good Luck and Happy Listening.




Posted By: hoppin62
Date Posted: August 17, 2008 at 12:55 PM
i am an idiot wrote:

Does one of the now empty harnesses have 8 pins on it?  If so it appears as though it is the input plug for the premium sound amplifier.  There is a harness available to make those connections.  Metra 70-5521 is the number for said plug.   Good Luck and Happy Listening.


I have 3 plugs from the dash that I am not using, the all have more than 8 pins... more like 16 - 20 in each! That's why the little smaller harness from Metra 70-5521 is throwing me off, because it will not fit! Maybe I need to cut the sides off of the smaller metra harness? I don't know. I received some diagrams, maybe I can just hard wire the unit.




Posted By: i am an idiot
Date Posted: August 17, 2008 at 2:32 PM
Can you take a picture of the back of the radio?




Posted By: hoppin62
Date Posted: August 17, 2008 at 3:39 PM
I have hard wired the stereo now, I got everything to work with the factory amp except the subwoofer, that's what I am working on now!




Posted By: hoppin62
Date Posted: August 17, 2008 at 3:42 PM
posted_image
posted_image




Posted By: hoppin62
Date Posted: August 17, 2008 at 3:49 PM
posted_image

This is what I meant by not having enough wires in the dash harness to have sound!




Posted By: hoppin62
Date Posted: August 17, 2008 at 3:54 PM
posted_image

This is where I found my 4 speaker inputs, sub input and factory amp turn-on! Currently, I don't beleive there is a aftermarket harness for this plug. (that's what they told me at a few stereo shops I went to!)




Posted By: i am an idiot
Date Posted: August 17, 2008 at 4:02 PM
That looks nothing like the deck I was thinking it was.   The Audiovox website has NO information for the audio wiring of your vehicle.  They do have alarm and remote start info, but zero on the audio wiring.




Posted By: hoppin62
Date Posted: August 17, 2008 at 4:06 PM
Here you guys go ... at my expense!!! posted_image

posted_image
posted_image
posted_image
posted_image
posted_image
posted_image




Posted By: hoppin62
Date Posted: August 17, 2008 at 4:08 PM
i am an idiot wrote:

That looks nothing like the deck I was thinking it was.   The Audiovox website has NO information for the audio wiring of your vehicle.  They do have alarm and remote start info, but zero on the audio wiring.


Can you post that info?




Posted By: i am an idiot
Date Posted: August 17, 2008 at 4:21 PM
Battery LIGHT/GREEN/ VIOLET (+) IGNITIONSWITCHHARNESS Ignition 1 RED / GREEN (+) IGNITIONSWITCHHARNESS Starter 1 RED / LIGHTBLUE (+) IGNITIONSWITCHHARNESS All Door Trigger BLACK/ BLUE (+) ATDRIVERSSIDEUNDERDASHLIGHT LF Latch BLACK / YELLOW (-) 14PINGREYCONECTORATVSM PIN4 posted_image RF Latch BLACK/ PINK (-) 14PINGREYCONECTORATVSM PIN5 LR Latch BLACK/ BLUE (-) 14PINCONECTORATVSM PIN11 RR Latch BLACK/ WHITE (-) 14PINCONECTORATVSM PIN6 Trunk Trigger BLACK/ BLUE (-) 14PINCONECTORATVSM PIN12 Parking Lights BROWN (+) LIGHT SWITCH If using individual latch wires you must diode isolate. Battery LIGHT/GREEN/ VIOLET (+) IGNITIONSWITCHHARNESS Ignition 1 RED / GREEN (+) IGNITIONSWITCHHARNESS Accessory 1 BLACK/ LIGHTGREEN (+) IGNITIONSWITCHHARNESS Accessory 2 BLUE/GREEN Starter 1 RED / LIGHTBLUE (+) IGNITIONSWITCHHARNESS Anti-Theft Type FORD PATS SYSTEM Anti-Theft Descript THE KEY SENDS A RF SIGNAL TO THE BCM THROUGH A ANTENNA LOCATED AROUND THE KEY CYLINDER Key Sense BLACK/ PINK (+) IGNITIONSWITCHHARNESS Key Sense must be powered to remote start.





Print Page | Close Window