Print Page | Close Window

1995 MITSU ECLIPSE P/W

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10809
Printed Date: April 28, 2024 at 3:03 PM


Topic: 1995 MITSU ECLIPSE P/W

Posted By: abitdragon
Subject: 1995 MITSU ECLIPSE P/W
Date Posted: March 12, 2003 at 4:44 PM

I recently had the p/w motor replaced in my 1995 eclipse.  The power windows now operate with the car OFF!  I have taken the car back to them and they seem to be unable to find thier own F*** UP.  any advice.  I think that they wired the p/w to the constant of the door locks...so not to have to run a new wire...but then both windows operate...

please advise




Replies:

Posted By: wiremadness
Date Posted: March 12, 2003 at 11:21 PM

That seems strange, since all they had to do was unplug the old motor, & plug in a new one!! This must have been done at the Mits dealer, huh?!

Pull the driver's door switch out and see if the main power feed has 12v with the key off. If so, they did something seriously wrong!

Also, I know it sounds strange, but dealers are NOT 12 volt guys, so check all of your fuses with the key on ignition. They could have blown a fuse, & just wanted to get the car out quick, so they monkey rigged a new hot lead.

Good luck



-------------
Chris
Store Manager


Print Page | Close Window