2008 pacifica, seat heaters, hot wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108282
Printed Date: July 19, 2025 at 2:45 PM

Topic: 2008 pacifica, seat heaters, hot wire

Posted By: russbm
Subject: 2008 pacifica, seat heaters, hot wire
Date Posted: October 20, 2008 at 8:25 PM

Anyone know the diagram for hooking a relay for this 2008 pacifica the wire is pink/gray and it a thin wire, and I am installing seat heater on both front seat. and that pink/gray wire is too thin for hot wire. Need to be so it only come on when the key is switch on and it will stay off when the key is off.

Replies:

Posted By: ckeeler
Date Posted: October 20, 2008 at 11:12 PM

well, your question confuses me a little, but i think what you need is this: on a standard relay connect the pink/gray to term 86, term 85 to ground, term 30 ignition power(10ga wire), term 87 to the seat heaters(10ga wire). is that what your looking for/asking?

Posted By: russbm
Date Posted: October 21, 2008 at 12:01 AM

I think so. Sorry about the confusion. It that the ign 12v wire is pink/gray and it is a thin wire, and I guess that mean to add a relay to it.

Print Page | Close Window