Power lock wires
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10936
Printed Date: July 18, 2025 at 4:00 PM
Topic: Power lock wires
Posted By: RaveChild
Subject: Power lock wires
Date Posted: March 15, 2003 at 5:17 PM
I am trying to install an autopage rs750 in my 1996 sunfire gt with keyless entry. According to the wiring guide, my power lock wire is lt. blue and unlock is white, they are located in either kick pannel. I have found two of each color in the drivers kick pannel that go into a black and blue harness. How do I now if these are the wires I need, and which one do I tap into??
Replies:
Posted By: RaveChild
Date Posted: March 16, 2003 at 5:52 AM
no one can help me??
Posted By: Velocity Motors
Date Posted: March 16, 2003 at 3:59 PM
Use a DMM or light tester on the target wire and toggle the lock/unlock switch. When you ground the DMM or light tester & toggle the switch, it should register a voltage. If it does, then that's the correct wire. If not, then try the other wire.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|