2003 ford escape lock diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109939
Printed Date: May 10, 2025 at 2:19 AM

Topic: 2003 ford escape lock diagram

Posted By: installer74
Subject: 2003 ford escape lock diagram
Date Posted: December 21, 2008 at 7:48 PM

I was wondering if anyone can help me out on what the diagram should look like for the lock/unlock wires in a 2003 ford escape. The unlock is a negative trigger and lock is negative through a 1k ohm resistor. It's a single wire multiplex system. Do I need to place a diode in line?

Replies:

Posted By: i am an idiot
Date Posted: December 21, 2008 at 8:59 PM

No you would not need to use a diode. You would simply connect the unlock wire of the alarm to that wire. And then connect the lock wire of the alarm to the resistor and connect the other end of the resistor to the same place you connected the unlock wire. If you do not want to have to deal with the resistor, Audiovox has the following info on that vehicle.

	Power Unlock		PINK/WHITE		(-)		DR. KICK PANEL
	PowerLock		WHITE/ VIOLET		(-)		DR. KICK PANEL

Print Page | Close Window