viper 5900 in 05 mustang gt

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110138
Printed Date: May 10, 2025 at 1:02 PM

Topic: viper 5900 in 05 mustang gt

Posted By: truckie117
Subject: viper 5900 in 05 mustang gt
Date Posted: December 28, 2008 at 9:03 PM

Hi
I am starting to install a viper 5900 and its been awhile. This is the first remote start. does anyone have a good place to put the brain and then the XCRS relay satelite. Do you have to cut the wires to the ignition and insert the relay into the circuit or just tap into the circuit? the wires are huge and the wires to the key switch so small.
I went to the wiring page and downloaded the color code. I have a bypass
Thanks
Mike

Replies:

Posted By: ckeeler
Date Posted: December 29, 2008 at 2:34 PM

you will need to cut the starter wire unless you dont use the anti-grind. for all wires, including the starter wire, solder them from the relay pack into the ignition harness. dont use t-taps, not only are they poor at conducting electricity, they fall off.

Posted By: truckie117
Date Posted: December 29, 2008 at 8:23 PM

Thanks
I will be posting pics as the install progresses

Print Page | Close Window