Print Page | Close Window

ford mondeo

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111975
Printed Date: May 06, 2025 at 8:01 PM


Topic: ford mondeo

Posted By: igni
Subject: ford mondeo
Date Posted: February 27, 2009 at 9:59 AM

Hihi.

I have ford mondeo 2005 does any body have the wiring for security instal?

Ingi



-------------
ingi



Replies:

Posted By: howie ll
Date Posted: February 27, 2009 at 5:30 PM

12v+ Red at ign loom.  Start Grey /black  same.  Ign GREEN/ YELLOW same place. Cut this and you also disable the starter.  Indicators, blue and blue red, GEM box.  Door contacts either at switches or GEM box, block diode them from GEM to avoid timer sleep/wake cycling and diode together, ditto trunk at light switch. See the 1076 Ford diagramme on this site.  Lock BLACK/ orange , unlock BLACK/ green, on separate plugs on where else GEM box, low current neg. If it's a Ghia with one shot close don't even attempt window lifts.  Bonnet (hood) needs a contact switch, cross brace from suspension at side.  If remote start the following should be done.  Tach injector non-common colour or if thers is what looks like a distributor, it's one of the wires going there.  Don't go for any fancy by-passes, remove chip from both keys, securely  glue 1 chip to top of ignition switch antenna ring.




Posted By: igni
Date Posted: March 01, 2009 at 7:14 PM
Ok thanks for the info.

-------------
ingi


Print Page | Close Window