2008 audi a6 stereo wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113167
Printed Date: May 14, 2024 at 10:51 AM
Topic: 2008 audi a6 stereo wiring
Posted By: swissmademan
Subject: 2008 audi a6 stereo wiring
Date Posted: April 15, 2009 at 1:57 AM
Can anybody post the wiring diagram for a 2008 Audi A6? I need the one with Bose if it makes a difference. Thanks in advance.
-------------
SwissMadeMan
Replies:
Posted By: i am an idiot
Date Posted: April 15, 2009 at 8:36 PM
What exactly are you trying to do?
Posted By: swissmademan
Date Posted: April 15, 2009 at 8:51 PM
Im trying to install a 4 channel amp and subs. Using a fosgate 360 and wanted to get the lines to setup the connection. Is there an issue with this vehicle?
-------------
SwissMadeMan
Posted By: i am an idiot
Date Posted: April 15, 2009 at 9:28 PM
If you are trying to change the radio, there are issues. What you are trying to do should be pretty easy. Give me a minute. OK change of plans. There is only data between the deck and the amp. You will have to locate the factory amp and get audio from the output of the amplifier. Audiovox has no info on the amp wiring. If you can find the amp and take a picture of the plug, and are willing to do a little foorwork with a meter, I can probably help you.
Posted By: howie ll
Date Posted: April 16, 2009 at 3:59 AM
To be honest it's probably more trouble than it's worth. Just pick up the 4 rear speaker wires, the antenna switch (if it's not data) and run to the high level inputs on the amp and simply drive the sub. The existing sound system is bloody good. You might have to go the whole 9 yards and replace all the speakers if it's a Bose system.
|