2009 dodge challenger

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113316
Printed Date: May 19, 2025 at 8:12 AM

Topic: 2009 dodge challenger

Posted By: christian gm
Subject: 2009 dodge challenger
Date Posted: April 21, 2009 at 10:12 AM

Hi to all,

please, I need wiring schematics of rear turn signal and brake lamp.

I need also brake lamp switch controls.

these are needed to modify the light to satisfy CEE homologation requirement

thanks to who can help me

(I have an all data subscription, but these schematics are not yet published)

bye!

Replies:

Posted By: howie ll
Date Posted: April 22, 2009 at 2:46 AM

I used to do this about 30 years ago! You wil need to take the 4 indicator feeds from the circuit before the rears join to the brake feeds and run them out. I even remember taking an Austin 2200 amber rear lens and grafting it on to a Buick! Don't forget the rear fog lights.

Posted By: christian gm
Date Posted: April 22, 2009 at 3:57 AM

howie ll wrote:

I used to do this about 30 years ago! You wil need to take the 4 indicator feeds from the circuit before the rears join to the brake feeds and run them out. I even remember taking an Austin 2200 amber rear lens and grafting it on to a Buick! Don't forget the rear fog lights.

YES I know!

but the problem with the new vehicles is that is all controlled by the BCM, and we can't remove the feed to TCM too!

bye!

Posted By: howie ll
Date Posted: April 22, 2009 at 9:00 AM

I apologise, you passed the "what do they know" test. Could I suggest a Mitchell wiring diagramme? BCM and TCM will have to be fooled. Are there any Chrysler dealers where you are? It won't hurt to know what they do with Voyagers etc. to "Eureopeanise" them

Print Page | Close Window