immobilizer b16a2 wire diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114359
Printed Date: May 11, 2025 at 7:58 AM

Topic: immobilizer b16a2 wire diagram

Posted By: raffi44
Subject: immobilizer b16a2 wire diagram
Date Posted: June 10, 2009 at 1:18 PM

hi i have honda civic hb 92. 3 weeks ago i bought new engine for it (b16a2) and after long 3 weeks i finaly finished connecting it to my wire harnes! now i find out that my new engine (B16A2) has an immobiliser in it... i have whole system (antena, modul and chip for my key) but now i need to know how to connect it orrrrr how to bypass my immobiliser (i would like to keep the immobiliser) anybody know wher to look??!! My immobilizer unit has 6 cables, two negative (black) and four positive (one RED / yelow, one RED / green and two RED / black one red-black is bigger the the other wires)!!! pllllsssss for any help because i loked everywere and i cant find s**t!!! thxxxxxx

Replies:

Posted By: howie ll
Date Posted: June 11, 2009 at 3:19 AM

Think you have a "tow to a dealer and deep pockets" for this one, the transponder, engine management and keys all have to be programmed together.

Posted By: ga_goosh
Date Posted: June 11, 2009 at 3:59 PM

just get a ecu that doesnt have the immobilizer. like a integra or delsol ecu or a jdm one if you can find it but i dont think you are going to get the immobilizer to work the way you want it to

Posted By: howie ll
Date Posted: June 12, 2009 at 12:50 AM

ga-goosh is probably right, blame the Germans for transponder immobilisers and the French (in Honda's case Valeo) for making them.