honda pilot 2006 about the key sense

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114511
Printed Date: May 01, 2025 at 4:58 AM

Topic: honda pilot 2006 about the key sense

Posted By: f29966
Subject: honda pilot 2006 about the key sense
Date Posted: June 17, 2009 at 9:59 AM

after i install the remote starter to my car , every time i start the car by the remote and turn the key on at ignition , but the key sense keep blinking , it don't do that if i use the key to start the car , please help me to fix it . thanks

Replies:

Posted By: i am an idiot
Date Posted: June 17, 2009 at 3:43 PM

Key Sense

BLUE/BLACK

(-)

IGNITION SWITCH HARNESS

According to Audiovox's website the above wire is required for remote start. Are you grounding this wire somehow?

Posted By: f29966
Date Posted: June 17, 2009 at 9:59 PM

i didn't know that wire is required for remote start , if i want to solve the problem i got to hook that wire to ground ?

Posted By: i am an idiot
Date Posted: June 17, 2009 at 10:07 PM

It needs to be grounded while remote started.

Posted By: f29966
Date Posted: June 17, 2009 at 10:56 PM

i don't understand much about it , can you explain some more ? this is my first time hooking up a remote starter ,do you mean i got mount the keysense wire to metal or to the remote start output (-) ? thank you so much for your help .

Posted By: i am an idiot
Date Posted: June 17, 2009 at 11:03 PM

I have no idea how much current the keysense wire draws. I can't see it requiring much, but in order for me to not give you bad information, I am going to suggest that you use a relay to do this. Your alarm should have a wire labeled, Ground While Running. This may also be the same wire that turns your park lights on when the vehicle is remote started. Following are the basic instructions for connecting the relay. Terminal 86 needs constant 12V. Terminal 85 connects to the alarm's GWR wire. Terminal 30 is to be grounded. Terminal 87 connects to the keysense wire I listed earlier.

Posted By: f29966
Date Posted: June 22, 2009 at 12:08 PM

that diagram don't work on my car , now i have a question , what is (-) ignition wire ? is it mean i got to hook it to ground ?

Posted By: i am an idiot
Date Posted: June 22, 2009 at 1:04 PM

Where are you coming up with a negative ignition wire? Audiovox has this info for that vehicle.

Battery	WHITE	(+)	IGNITION SWITCH HARNESS
Ignition 1	BLACK / YELLOW	(+)	IGNITION SWITCH HARNESS
Accessory 1	WHITE/ BLACK	(+)	IGNITION SWITCH HARNESS
Accessory 2	YELLOW	(+)	IGNITION SWITCH HARNESS
Starter 1	BLACK/ WHITE	(+)	IGNITION SWITCH HARNESS
Anti-Theft Type	UNIVERSAL IMMOBILIZER
Anti-Theft Descript	THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER
Key Sense	BLUE/BLACK	(-)	IGNITION SWITCH HARNESS
Tachometer	BLUE	(AC)	AT PCM MODULE ON RIGHT SIDE OF ENGINE COMPARTMENT
Speed Sense	BLUE/WHITE	(AC)	AT PCM MODULE ON RIGHT SIDE OF ENGINE COMPARTMENT
Parking Lights	RED / BLACK	(+)	AT DRIVERS SIDE UNDER DASH FUSEBOX
Low Crr. Pk Lights	RED / YELLOW	(-)	AT VEHICLE LIGHT SWITCH
Brake Lights	WHITE/ BLACK	(+)	AT SWITCH ABOVE BRAKE PEDAL
Reverse Lights	GREEN/ BLACK	(+)	IN HARNESS IN PASSENGER KICKPANEL TO REAR
Horn	LIGHT GREEN/ BLUE	(-)	IN HARNESS AT STEERING COLUMN
Alarm Indicator	RED / BLUE	(-)	AT DRIVERS SIDE UNDER DASH FUSEBOX
Rear Defrost	BROWN / YELLOW

Posted By: howie ll
Date Posted: June 22, 2009 at 4:14 PM

Of course it's negative, try grounding it then starting the car. Hope you've got a good fire extinguisher and a handy selection of the proper Honda style 50amp fuses. I was joking but if you have to ask these questions without out testing, should you be doing this job?