window rollup module 04 avalanche
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114678
Printed Date: June 03, 2024 at 9:09 AM
Topic: window rollup module 04 avalanche
Posted By: psycosilibian
Subject: window rollup module 04 avalanche
Date Posted: June 25, 2009 at 3:53 AM
i have an 04 avalanche i added window roll up module the rears and passanger side wor fine but on the driver when the alarm is activate to rollup the windows both wires on the window motor turn positive and doesn't roll up. can any one help?
Replies:
Posted By: howie ll
Date Posted: June 25, 2009 at 12:22 PM
One the driver's side have you gone to switch or motor. Connect at motor and test first. Both wires should sit at ground. On "up" one will stay at ground the other will go live. That's the one you need. On down, again the one that went live will stay on ground and the other will go live. If that's your set-up, then wire accordingly. Ther's no way any set of window wires would have both live on a modern vehicle, the motor just wouldn't work. I think you've caught a data lead between switch and motor.
|