Print Page | Close Window

Wiring Info for Sebring Vert.

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11549
Printed Date: July 05, 2025 at 3:10 AM


Topic: Wiring Info for Sebring Vert.

Posted By: ILuvItLoud
Subject: Wiring Info for Sebring Vert.
Date Posted: March 27, 2003 at 8:37 PM

Hi, I am planning on installing my Viper 790xp in my 97 Chrysler Sebring this weekend. I basically know how to do it but I need a little help with the door locks. I see that they are a single wire system, so do they even need relays or just some sort of resisters? A diagram would be nice if someone could post it. Thanks



Replies:

Posted By: Velocity Motors
Date Posted: March 29, 2003 at 7:07 AM
<"https://www.velocitymotorsport.com/images/security/ball.gif">Positive Single Door Lock Diagram

The target wire is WHITE/ GREEN found to the rear of the fuse box under the dash. Door locks are positive trigger, must use relays. Lock is a straight positive trigger, unlock requires a positive trigger with a 1500 ohm resistor wired in series.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: ILuvItLoud
Date Posted: March 30, 2003 at 5:17 PM
Thanks a lot, Jeff. You seen to be very knowledgeable on this board. I appreciate your help man.

Leon





Print Page | Close Window