Print Page | Close Window

2003 Kia Sedona, Back-Up Wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115547
Printed Date: April 11, 2021 at 4:22 PM


Topic: 2003 Kia Sedona, Back-Up Wire

Posted By: windrider
Subject: 2003 Kia Sedona, Back-Up Wire
Date Posted: August 09, 2009 at 2:06 PM

can someone tell me the best location in the front to find a hook up for the back-up wire?



Replies:

Posted By: i am an idiot
Date Posted: August 09, 2009 at 7:47 PM
You tell us what year the car is, and I am betting we can help you.

-------------
So tell me, How is that "Hope and Change" working out for you?




Posted By: i am an idiot
Date Posted: August 09, 2009 at 7:55 PM
08 =
posted_imageReverse LightsRED(+)AT FRONT ACCESS MODULE UNDER HOOD
07 =
posted_imageReverse LightsRED(+)RAM MODULE

Note for 07 reads PIN #19 OR 20 (40 PIN PLUG)

06 = Same as 07

05 =

Reverse LightsRED / GREEN(+)

HARNESS TO REAR DR KICK

04 =

Reverse LightsGREEN(+)@ PCM PIN D 20

03 = Same as 04

02 = Same as 03 and 04



-------------
So tell me, How is that "Hope and Change" working out for you?




Posted By: howie ll
Date Posted: August 10, 2009 at 3:28 AM
Read the post about the VW 2005, it also tells you how to find it. Anyway here goes. Go to the back with ignition and parking brake on, and gear shift in reverse.  Check which wire to lens cluster goes live then shuts down when you go out of reverse, then go to one of the kick panels and find the thickest floor loom, find the same colour wire and check it there.  If this was Japanese, I would say look for a primary clolour green wire.




Posted By: windrider
Date Posted: August 11, 2009 at 12:08 PM
the car is a 2003 kia sedona




Posted By: i am an idiot
Date Posted: August 11, 2009 at 7:54 PM
i am an idiot wrote:

08 =
posted_imageReverse LightsRED(+)AT FRONT ACCESS MODULE UNDER HOOD
07 =
posted_imageReverse LightsRED(+)RAM MODULE

Note for 07 reads PIN #19 OR 20 (40 PIN PLUG)

06 = Same as 07

05 =

Reverse LightsRED / GREEN(+)

HARNESS TO REAR DR KICK

04 =

Reverse LightsGREEN(+)@ PCM PIN D 20

03 = Same as 04

02 = Same as 03 and 04




-------------
So tell me, How is that "Hope and Change" working out for you?





Print Page | Close Window