Print Page | Close Window

need wiring diagram for 2007 suzuki reno

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115825
Printed Date: May 13, 2025 at 12:44 AM


Topic: need wiring diagram for 2007 suzuki reno

Posted By: ridin_low07
Subject: need wiring diagram for 2007 suzuki reno
Date Posted: August 21, 2009 at 11:21 PM

I bought my brothers cd player out of his 2007 Reno after he totalled it so I could retro fit it into my girlfriends 93 Beretta. The problem that I am running into is the wiring. It has an 18 PIN connector that I am not quite sure where everything wires up to. I know the speaker wiring because it says it on there but others are just confusing. This is a list of what is on there...........

1.Front R-Ch (+)

2.Rear R-Ch (+)

3.Illumination

4.Acc B+   ??

5.Back-Up B+   ??

6.Phone Mute  ??

7.Rear L-Ch (+)

8.Front L-Ch (+)

9.Front R-Ch (-)

10.Rear R-Ch (-)

11.Illumination (-)

12.Auto Ant B (+)   Don't have a power antenna so I don't need this one

13.Remocon Ground  ??

14.Ground

15. N.C. ????

16.Front Remocon Data  ???

17.Rear L-Ch (-)

18.Front L-Ch (-)

If anyone can help me out I would be really appreciative.




Replies:

Posted By: i am an idiot
Date Posted: August 21, 2009 at 11:32 PM

Acc B+ = Switched 12 volts.  This wire turns the radio on when you turn the key on.

Back Up B+ = Constant 12 volts, this wire needs 12 volts on it even when the key is not turned on.

N. C. = No Connection

Phone mute mutes the audio when you are on the cell phone, if your cell phone has a mute output wire. 

Disregard the remote control wires.



-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB




Posted By: ridin_low07
Date Posted: September 10, 2009 at 7:49 PM
thanks man i got it all wired up and working now I just have to figure out the illumination and ill be all set.





Print Page | Close Window