2009 Toyota Venza Alarm/Remote Start Wring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115970
Printed Date: May 01, 2025 at 7:06 AM
Topic: 2009 Toyota Venza Alarm/Remote Start Wring
Posted By: ricardoboston
Subject: 2009 Toyota Venza Alarm/Remote Start Wring
Date Posted: August 28, 2009 at 6:26 PM
i need a 2009 toyota venza wiring diagram ,for alarm/ remote start. thanks .
Replies:
Posted By: i am an idiot
Date Posted: August 28, 2009 at 6:30 PM
Posted By: i am an idiot
Date Posted: August 28, 2009 at 6:31 PM
 | Battery | | PINK OR BLUE | | (+) | | IGNITION SWITCH HARNESS | | |  | Ignition 1 | | RED | | (+) | | IGNITION SWITCH HARNESS | | |  | Ignition 2 | | GREEN | | (+) | | IGNITION SWITCH HARNESS | | |  | Accessory 1 | | GREEN | | (+) | | IGNITION SWITCH HARNESS | | |  | Starter 1 | | GREEN | | (+) | | IGNITION SWITCH HARNESS | | |  | Starter 2 | | RED | | (+) | | IGNITION SWITCH HARNESS | | |  | Key Sense | | BROWN | | (-) | | IGNITION SWITCH HARNES | |  |  | Tachometer | | GRAY | | (AC) | | AT DATA LINK CONNECTOR UNDER DASH | | |  | Speed Sense | | VIOLET | | (AC) | | BRAKE ACTUATOR ASSEMBLY | | |  | Parking Lights | | GREEN | | (+) | | UNDERDASH FUSEBOX | |  |  | Low Crr. Pk Lights | | RED | | (-) | | AT MAIN BODY ECU | |  |  | Brake Lights | | LIGHT GREEN | | (+) | | AT SWITCH ABOVE BRAKE PEDAL | | |  | Reverse Lights | | GREEN | | (+) | | IN HARNESS IN DRIVER KICKPANEL TO REAR | |  |  | Horn | | YELLOW | | (-) | | IN HARNESS AT STEERING COLUMN | |  |  | IMO | | BROWN | | (DATA) | | AT ECM MODULE | | |  | IMI | | GREEN | | (DATA) | | AT ECM MODULE |
Posted By: ricardoboston
Date Posted: August 29, 2009 at 10:16 AM
thank you for your time . also i need to find out with bypass i shoud use for this car,xk05 its good one?
Posted By: ricardoboston
Date Posted: August 29, 2009 at 8:46 PM
sorry but im having one problem on bypasskit [xk05]they re asking for get connected the gauge wires on 2 diferent connectors and in your diagram says IGNITION SWITCH HARNESS the location for ign 1 ign2 starter1 starter2 acc,if you have done this car before or have any tips please thanks
Posted By: ricardoboston
Date Posted: August 30, 2009 at 1:45 PM
hello friend it is possible for you to post the notes for this diagram ?again thanks 2009 toyota venza
Posted By: i am an idiot
Date Posted: August 30, 2009 at 2:18 PM
sorry I have no info on the bypass. The last alarm I actually installed had a keyswitch mounted on the fender.
Posted By: ricardoboston
Date Posted: August 31, 2009 at 8:24 PM
has anyone done a remote starter/alarm on 2009 toyota venza? my question is the gauge wires acc ign1 ign2 12v start on this vehicle they re connected like the other cars on ignition switch harness or another location ?about the bypass any idea with one?i got a wiring diagram but its not complete .ill need one complete with notes please cause i need more info THANKS
Posted By: ajstetler
Date Posted: August 31, 2009 at 11:31 PM
https://xpresskit.com/product.aspx?prodid=PKALL&make=Toyota&model=Venza&year=2009
Use a DMM if you don't have a complete list of wire colors. No different than any other Toyota.
------------- Big Al
Posted By: ricardoboston
Date Posted: September 03, 2009 at 5:19 PM
this wiring diagram its from DEI?
Posted By: i am an idiot
Date Posted: September 03, 2009 at 6:13 PM
|