Print Page | Close Window

2005 dodge ram 2500 diesel

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116074
Printed Date: May 15, 2025 at 3:04 AM


Topic: 2005 dodge ram 2500 diesel

Posted By: dodge-dodge
Subject: 2005 dodge ram 2500 diesel
Date Posted: September 03, 2009 at 8:41 AM

Looking for the ground wiring layout for a 2005 Dodge Ram 2500 Diesel that goes along the frame and possibly an approximate number how many.

The fuse for the fuel relay is only reading 6 in the one 'hole' and 12 in the other while was advised both need to be 12 and to check the grounds to ensure electronics are properly being read.  Not sure where all these are tho.

Any other advice appreciated.




Replies:

Posted By: tommy...
Date Posted: September 03, 2009 at 9:51 AM
Is the fuse bad...Pull the fuse and replace(sometimes its hard to tell)...? Also where the legs of the fuse go in...one prong should have voltage ...and the other side should have  no voltage...Go ahead and check what the voltage is w/ the fuse removed...? Although im guessing its going to read 12v...

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!




Posted By: dodge-dodge
Date Posted: September 03, 2009 at 12:42 PM

tommy... wrote:

Is the fuse bad...Pull the fuse and replace(sometimes its hard to tell)...? Also where the legs of the fuse go in...one prong should have voltage ...and the other side should have  no voltage...Go ahead and check what the voltage is w/ the fuse removed...? Although im guessing its going to read 12v...

one prong reads 12v the other 6v - is that correct or should both be 12?  This is to the fuel pump relay






Print Page | Close Window