Print Page | Close Window

2002 Ranger Ignition Switch Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11610
Printed Date: May 10, 2025 at 3:03 PM


Topic: 2002 Ranger Ignition Switch Wiring

Posted By: dinne
Subject: 2002 Ranger Ignition Switch Wiring
Date Posted: March 29, 2003 at 5:17 PM

I have seem to have dug myself a hole.  I am installing a remote starter in my Ranger and now the truck will not run.  I unplugged the ignition switch harness and removed the cover over the front of it.  This allowed me to pop out the connectors so I could solder my connections for the remote start.  This is where I think I messed up.  I think I slipped one of the connectors back into the harness housing IN THE WRONG PLACE.  Now, without the remote starter, I have a truck that will turn over and fire but won't stay running!!

Any help would be greatly appreciated, especially if someone has a pinout of the ignition switch harness plug.

Thanks

Dinne




Replies:

Posted By: dinne
Date Posted: March 30, 2003 at 12:33 PM

posted_imageOK, call of the hounds...................

I ended up subscribing to Alldata.  They had everything I needed to figure out the mistake.  My truck is up and running.

Thanks

Dinne


Print Page | Close Window