Print Page | Close Window

2005 ford explorer

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116761
Printed Date: May 06, 2024 at 2:19 AM


Topic: 2005 ford explorer

Posted By: ricardoboston
Subject: 2005 ford explorer
Date Posted: October 06, 2009 at 6:40 PM

need dei tech sheet for 2005 ford explorer ,thanks



Replies:

Posted By: flobee4
Date Posted: October 06, 2009 at 7:03 PM
Here you go, if you scroll down there are pictures:

Click Here

Also, I remember that the parking light wire should also be in the drivers kick (brown+) and brake also(light green+). Test...

You need to test for 2 things on that truck. First if you need to deal with the truck disabling the unlock function and if there is a factory alarm. You can test this real easy. Roll down the drivers window and lock the car by pressing the lock button on the door WITH the drivers door open. Close the door and wait about a minute. Reach in through the window and press unlock on the door. If it doesn't unlock the trucks is disabling the locks. If it unlocks you are good to go. Second test is while the door is still closed open the door using the handle inside. If the horn starts honking you have a factory alarm. If not, you do not have a factory alarm, therefore will not find the disarm wire listed. It only exists on trucks with factory alarm.

As for the locks. If the truck disables them, open the car manual and look in there for disabling that function. It has to do with the key in the ignition switch and a sequence of hitting lock/unlock on the door switch. Test afterwards by following the above again to make sure you deactivated it.


Print Page | Close Window