did anyone do a equinox 2010?

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117492
Printed Date: May 14, 2025 at 11:20 PM

Topic: did anyone do a equinox 2010?

Posted By: syl20rochon
Subject: did anyone do a equinox 2010?
Date Posted: November 05, 2009 at 7:52 PM

Hey guys, did anyone do a chevrolet equinox 2010, Idata link, express kit nor Fortin have bypasses for that vehicule, I know that it can be done with a key / universal bypass but which passlock version is in the vehicule? If anyone did one, I'd like to know what were the results....

Thanks

-------------
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.

Replies:

Posted By: mobiletint
Date Posted: November 07, 2009 at 1:12 PM

I have one next week. Im going to try idatalink GM3. Its the passlock that has a different voltage through the key cycle. I got directech info printed out, but Im calling firstech to see if any of thier techs have done it. Im going at it like a traverse. There is some things to do under the hood too.

Not excited, but it may turn out to be easy.

Posted By: syl20rochon
Date Posted: November 09, 2009 at 7:55 AM

Please keep me informed, I have a customer waiting for me...

Thanks.....good luck.

Sylvain.

-------------
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.

Posted By: mobiletint
Date Posted: November 09, 2009 at 4:09 PM

Im doing it friday morning... Im calling wade from compustar tech support tomarrow

Posted By: mobiletint
Date Posted: November 10, 2009 at 5:25 PM

Use ADS DL GM3 install type 2

It wont bypass the key through data, you have to use the computrans or a 555u.

Do like any other new GM truck. No brake wire through data. Thats about it. Just do acy, ignition, parking, horn, brake, module, 12v, and go.

If its any different, I let you know.

Posted By: syl20rochon
Date Posted: November 10, 2009 at 6:34 PM

Thanks....let me know......D

-------------
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.

Posted By: cdrcustoms1
Date Posted: December 16, 2009 at 4:32 AM

I just did one of these, I used an Idatalink ADS-AL-CA flashed it with the GM6 software. It is not listed on their site, but when you click on it, it lists the equinox. When you wrap the key and the ignition wind it more than the 5 or 6 times thes say to.