95 ford explorer 2door
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117661
Printed Date: May 14, 2025 at 8:26 PM
Topic: 95 ford explorer 2door
Posted By: lordnikon0027
Subject: 95 ford explorer 2door
Date Posted: November 11, 2009 at 7:43 PM
hi hope u can help me i have a 1995 ford explorer 2 door i ws told it had a factory amp hooked up to the factory head unit. im trying to put an aftermarket stereo in it and when i hook up the aftermarket wiring harness i dont get sound. i wa told topower up the amp but i dont know what wires are what for the amp and the rest of them can you please help me this is driving me nuts.. thanks
-------------
mike saylor
Replies:
Posted By: tommy...
Date Posted: November 13, 2009 at 7:36 PM
Is there an antenna wire behind the factory radio...? Normally to power up most factory amps, you take the blue/white wire from aftermarket radio...And connect it to the blue wire on the aftermarket harness you bought...! The factory amp is usually located behind the right rear plastics...You have to take off the seatbelt bolts...and alot of panels and clips...If you do have to access the amp...Might want to invest in some panel poppers...And some replacement clips...The clips break/wear out when removed...Its good to have a couple on hand...Prevent those annoying rattles...!
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
|