2000 explorer keless entry

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117928
Printed Date: July 14, 2025 at 7:04 AM

Topic: 2000 explorer keless entry

Posted By: ausnovice
Subject: 2000 explorer keless entry
Date Posted: November 22, 2009 at 3:35 AM

i have a keyless entry kit tp install on my 2000 ford explorer the suplied harness wires are, black, brown, white, green ,blue for drivers door with green and blue wires for the passengers doors.

how do these wires match up with the wires i find in the car doors and drivers kick panel.

can someone help me

Replies:

Posted By: i am an idiot
Date Posted: November 22, 2009 at 3:51 AM

Does your vehicle have dlectric door locks?

Posted By: 91stt
Date Posted: November 22, 2009 at 4:25 AM

those sound like actuator colors.
do you have a keyless entry kit or a central locking kit?

Posted By: ausnovice
Date Posted: November 22, 2009 at 4:32 AM

it is a keyless entry kit for my existing factory central locking and not sure if dielectric locks.

Posted By: i am an idiot
Date Posted: November 22, 2009 at 5:11 AM

dlectric was a typo. I meant Electric. You have actuators already mounted in each of your doors. You do not need the 2 actuators that you are asking about. Is there another piece of the kit?

Posted By: ausnovice
Date Posted: November 22, 2009 at 5:24 AM

yes i have actuators in the doors, i am just trying top air up the kit wire colours from control unit,(black, brown, white, green ,blue) with the harness colours in the car.

in the supplied diagram blue and green wires are common to all doors, and the brown and white wires only to drivers door with the black wire which is grounded.

i am asuming that pink / YELLOW (-) and pink/light green(-) would be common lock/unlock wires to all passenger doors and pink/black (+) and RED / orange (+) are the drivers door wires?

which do i connect the black wire from control unit? to the pink/green (-) ?