2009 ford escape

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117953
Printed Date: May 10, 2025 at 8:44 PM

Topic: 2009 ford escape

Posted By: slowjoe6969
Subject: 2009 ford escape
Date Posted: November 23, 2009 at 1:35 PM

I am Installing a Remote Starter in in a 2009 ford Escape. I have found the wiring diagram is the same as the 2008, but there is no tach wire listed? anyone be able to help with this?

Thanks

Replies:

Posted By: Velocity Motors
Date Posted: November 23, 2009 at 3:56 PM

Go to the injector or coil for this vehicle. Remove the engine cover and find the two wires at each injector and use the wire that is NOT common between the injectors.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: carstereoguy
Date Posted: January 04, 2010 at 9:27 PM

how about the 12 volt supply and pk lights for a 2008 escape

Posted By: Velocity Motors
Date Posted: January 05, 2010 at 7:19 AM

12 volt you need to go to the battery and PL (+) PURPLE / WHITE Fuse box (passenger side of center console)

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mobiletint
Date Posted: January 05, 2010 at 8:56 PM

That parking light wire sucks to get at too!

Car starts itself if you just cycle the ignition... I set these up for a 1.5 sec blind crank, works great.

Print Page | Close Window