auto start, 96 caprice classic

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118394
Printed Date: May 12, 2025 at 5:55 AM

Topic: auto start, 96 caprice classic

Posted By: coinboy2001
Subject: auto start, 96 caprice classic
Date Posted: December 10, 2009 at 4:25 AM

I installed an autostart unit into my 1996 caprice classic 4.3L. I have it wired up. I have a pass2 module with a diagram but it lists the wrong pin numbers in the main harness. I was wandering if you could tell me the correct pins. I believe it was just two I needed.

Replies:

Posted By: Velocity Motors
Date Posted: December 10, 2009 at 7:58 AM

Need more information. What bypass are you using ? What Autostart model are you using ? What diagram did you use that you think is wrong ? How did you wire up the module so far ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: coinboy2001
Date Posted: December 10, 2009 at 12:14 PM

I am using pursuit series model pro-9175ft autostart keyless entry. All hooked up correctly. Pass2 lieps200 omega. Says use 48 way connector yellow wire in pin d3 and ORANGE / black wire in pin c4. No wires are in those spots there empty.

Print Page | Close Window