06 mazda6 factory alarm

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119098
Printed Date: May 11, 2025 at 5:51 PM

Topic: 06 mazda6 factory alarm

Posted By: ituneyou
Subject: 06 mazda6 factory alarm
Date Posted: January 04, 2010 at 7:55 PM

hey guys got this 06 mazda6 from the body shop the left doors were replaced and now when you arm the factory alarm with the factory keyless remote the horn is triggered, any help?

thanks

-------------
A man has got to know his limitations

Replies:

Posted By: jeffwhiteman
Date Posted: January 07, 2010 at 8:50 PM

check the cars manual in the security section. there should be a way to disable the horn chirp and make it arm silently.

Posted By: KPierson
Date Posted: January 08, 2010 at 6:47 AM

Also check to make sure the door pins on both doors work - possibly the horn honk is telling you it thinks a door is open.

-------------
Kevin Pierson

Posted By: howie ll
Date Posted: January 08, 2010 at 10:15 AM

Guarantee they haven't wired the door triggers properly. I'm constantly doing put rights for body shops.

Posted By: ituneyou
Date Posted: January 08, 2010 at 11:13 PM

Thanks guys for the replies, I found the problem after ripping half the car apart, all i did was cycle the door locks with all the doors closed and it reset the system, weird !!!!

-------------
A man has got to know his limitations

Print Page | Close Window