reverse wire for a nissan cube backup cam

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119398
Printed Date: May 13, 2025 at 1:29 PM

Topic: reverse wire for a nissan cube backup cam

Posted By: trevors
Subject: reverse wire for a nissan cube backup cam
Date Posted: January 16, 2010 at 11:31 PM

The car is a 2009 Nissan Cube and the HU requires a reverse wire to tell when to display the rear camera view.

The camera is a Pioneer ND-BC20PA

The HU is a Pioneer AVIC-P910BT

I need help identifying the appropriate wire for the reverse signal.

Thanks -- Trevor

Replies:

Posted By: trevors
Date Posted: January 17, 2010 at 12:14 AM

Don't think this makes any difference, but it's a Cube SL.

Posted By: howie ll
Date Posted: January 17, 2010 at 3:17 AM

Remove rear lamp parts to access plug which feeds rear lamps including reversing lamp bulb, turn on ignition only and place vehicle in reverse.
TEST
Alternatively if an auto there should be a plug adjacent the gear shift with 3 or 4 wires. It's possibly GREEN/ YELLOW.

Posted By: trevors
Date Posted: January 17, 2010 at 12:55 PM

Yes, it is a CVT (only option for the SL). Thanks for the tips -- much appreciated :)!

Print Page | Close Window