1100f

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119552
Printed Date: May 14, 2025 at 10:36 AM

Topic: 1100f

Posted By: paddd
Subject: 1100f
Date Posted: January 22, 2010 at 7:23 PM

Hi All:
I have a 2006 ford ranger and I want to install a directed electronics 1100f ford pats/securilok remote start interface data in it to work with my autostart remote starter can anyone explain how I wire this in?
thanks

Replies:

Posted By: kreg357
Date Posted: January 22, 2010 at 8:44 PM

First, you will need two working, non-clone, keys to program the bypass.

Wire as follows:

1100F Nine wire harness

GREEN/ Red wire to IGN transponder plug pin 3 Gray/Orange wire.

Gray/Red wire to IGN transponder plug pin4 WHITE/ Light Green wire.

Pink wire to IGN transponder plug pin2. This connection can also go to the main IGN harness Ignition wire.

1100F Four wire harness

Red wire to +12v constant

Black wire to ground

Blue/White to Remote Start wire labeled as "Ground When Running"

Follow the install guide. Do a factory reset first. Then select install mode as Standard ( two flashes). Then follow the programming guide for a Transponder Type 3.

-------------
Soldering is fun!

Posted By: kreg357
Date Posted: January 22, 2010 at 8:53 PM

Here is the manual, if you don't have it:

https://www.the12volt.com/installbay/file.asp?ID=696

-------------
Soldering is fun!

Posted By: paddd
Date Posted: January 23, 2010 at 9:42 AM

Thanks guys this is the exact info I was looking for