Print Page | Close Window

viper 5301 wiring diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119570
Printed Date: May 14, 2025 at 1:29 AM


Topic: viper 5301 wiring diagram

Posted By: wuzcrackin
Subject: viper 5301 wiring diagram
Date Posted: January 23, 2010 at 6:14 PM

Thanks in advance for any help.

Just purchased 2 Viper 5301 Remote starts. For a 2005 Nissan Titan, and a 2006 Nissan Maxima without smart key. Neither one of the Viper units came with the generic wiring diagram. I've found the vehicle specific info on this site but not the diagram for the viper.



Replies:

Posted By: wuzcrackin
Date Posted: January 24, 2010 at 6:55 PM
After 2 days of looking I found it somewhere else. I don't know how to post it here so if anyone else needs it just shoot me a message.



Posted By: blizz2005
Date Posted: January 25, 2010 at 3:09 PM
  1. RED / white   (-) 200ma trunk release output
  2. red  (+)  12vdc constant input
  3. brown (-) horn honk ouput
  4. WHITE/ brown light flash isolation wire
  5. black (-) ground
  6. violet (+) door triger input
  7. blue factory horn input
  8. green (-) door triger input  n/c  or n/o
  9.  BLACK/ white (-) dome light output
  10. WHITE/ blue(-) remote start/ tutbo timer activation input
  11. white parking light output
  12. orange(-) ground when armed output
 
 
H2
  1. light GREEN/ black factory alarm disarm output
  2. ORANGE / black aux 4 output
  3. GREEN / WHITE factory alarm arm output
  4. violet/black aux 2 ouput
  5. WHITE/ black aux 3 output
  6. WHITE/ violet aux 1 output
  7. gray/black diesal wait to start
  8. empty
  9. violet/white tack input
  10. dark/blue status output
  11. pink/white flex relay control output
  12. orange axxesory output
  13. purple starter output
  14. pink ignition  1 output
  15. grey hood pin
  16. blue/white 2nd statis / rear defrogger output
  17. brown (+) brake shutdown input
  18. BLACK/ white  neutral safty input
H3 
  1. pink ignition 1 input/output
  2. RED / white fused (30a) ignition 2 flex relay input 87
  3. orange accesory output
  4. violet starter output
  5. red fused (30a) igniton 1 input
  6. pink/white ignition 2 / flex relay output
  7. pink/black flex relay input 87a key side  if required
  8. RED / black fused (30a) accessory/ starter input 


-------------
tyler armstrong



Posted By: a99blackrt
Date Posted: September 19, 2010 at 4:21 PM
can you send me the install manual for this unit!



Posted By: smokeman1
Date Posted: September 19, 2010 at 5:53 PM
In the downloads section is the Install Manual for the Viper 5301 in pdf format.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation


Print Page | Close Window