2001 ford f 150 4 door

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119846
Printed Date: May 06, 2025 at 9:57 PM

Topic: 2001 ford f 150 4 door

Posted By: little rig
Subject: 2001 ford f 150 4 door
Date Posted: February 02, 2010 at 8:33 PM

Have a 2001 ford f 150 4 door that I installed a bulldog security remote start with keyless on. The remote start is the RS1100. Remote start works fine, but I'm not sure how to wire up the 5 pin harness from the rs to the door locks. The truck does have factory keyless entry. I have the wiring colors for the lock and unlock wires on the truck. I just need to know how to wire it up right. Thanks

-------------
Little Rig

Replies:

Posted By: kreg357
Date Posted: February 03, 2010 at 5:21 PM

Follow the instructions for a Type "B" (-) Nagative System as your truck has the factory keyless option.

You will be attaching only 3 wires from that harness.

The RED / Black wire with the fuse goes to ground.

The GREEN/ Black wire goes to the UnLock wire ( Pink/Light Green ) in the driver kick panel.

The Blue/Black wire goes to the Lock wire ( Pink / YELLOW ) in the drivers kick panel.

Thats it. Good Luck

-------------
Soldering is fun!

Posted By: little rig
Date Posted: February 04, 2010 at 2:38 PM

Thanks

-------------
Little Rig

Print Page | Close Window