2010 dodge nitro
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120547
Printed Date: August 25, 2025 at 1:34 PM
Topic: 2010 dodge nitro
Posted By: mustyk@att.net
Subject: 2010 dodge nitro
Date Posted: March 06, 2010 at 7:30 AM
got a 2010 Niro for an alarm but can't find any ACCURATE wiring diagrams and it is NOT the same as 2008 or 2oo9. I have an I-DATA-LINK module MDB-ALL with CH3 firmware for it but I cant confirm that even with the manufacturer. PLEASE HELP!!
------------- thetopinstaller
Replies:
Posted By: kreg357
Date Posted: March 06, 2010 at 3:17 PM
I am not familiar with the Omega labeled iDatalink modules, but CH3 doesn't sound right. Going by the iDatalink Web site, they list an ADS AL Ca with the ADS AL(DL) CH5 (Ver2.1) firmware. Here is a link to their web site : https://www.idatalink.com/helpdesk/ I can't find a 2010 Nitro wire listing for you on the sites I have access to. Sorry. 
------------- Soldering is fun!
Posted By: Velocity Motors
Date Posted: March 07, 2010 at 8:49 AM
the 2010 requires CH5 firmware. Even if your only doing alarm, it will be beneficial to use the iDatalink ADS-DL module and use it in W2W mode.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mustyk@att.net
Date Posted: March 10, 2010 at 3:16 PM
Just an update message to Velocity Motors, We wanted to use MDB-ALL because we had it IN STOCK. But we ended up using CH3 firmware for alarm only-seemed to work all inputs and outputs for doors, trunk, locks, lights, horn. Thanks for the feedback-maybe the CH6 will work for remote start immobiliser too???
-------------
thetopinstaller
Posted By: Velocity Motors
Date Posted: March 11, 2010 at 6:34 PM
Not sure who makes the MDB-ALL but the iDatalink would use the CH5 firmware. Good to hear that it worked out with the MDB-ALL.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mustyk@att.net
Date Posted: March 12, 2010 at 7:20 AM
The OL-MDB-ALL is made by i-datalink FOR Omega/Excalibur Alarm Company. Omega has been selling the entire line of i-datalink products under their name -you'll know by the prefix: OL- omega-link
-------------
thetopinstaller
|