2010 silverado wt wiring, bypass

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120720
Printed Date: April 23, 2024 at 3:24 AM

Topic: 2010 silverado wt wiring, bypass

Posted By: rkanauer
Subject: 2010 silverado wt wiring, bypass
Date Posted: March 14, 2010 at 11:36 AM

Looking for wiring information for a 2010 Silverado (Work Truck). I'm planning to wire an AutoPage RS-602 remote starter (new in box that I have had for some time) to the truck. Remote start will be the only function I plan to use. Also, what would be the bypass module that would best work for the money? Not sure if a GMBP or GMDLBP will work (don't think so). Maybe just the DLPK? Any help would be appreciated! Thanks!

Bob

-------------
RARIHTS

Replies:

Posted By: Velocity Motors
Date Posted: March 14, 2010 at 5:11 PM

We use the ADS-TBPL for bypass only from iDatalink. The module is very inexpensive and takes care of the PK3+ system.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: rkanauer
Date Posted: March 18, 2010 at 6:56 PM

Thanks for the post! Assume this is the ADS-TBSL PL. Will this work w/ the 2010 Silverado 1500? Did not have on the iDatalink vehicle list. Do I need to flash from the web site or will it learn from the vehicle? Thanks again.

Bob

-------------
RARIHTS

Posted By: Velocity Motors
Date Posted: March 19, 2010 at 5:03 PM

Bob, this will owrk on the 2010 Silverado 1500. Just flash the unit as a 2009 and it will still work. Nothing changed between the two vehicle years.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window