Print Page | Close Window

96 Jeep Grand Cherokee Alarm/Remote Start Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121140
Printed Date: May 03, 2024 at 6:20 PM


Topic: 96 Jeep Grand Cherokee Alarm/Remote Start Wiring

Posted By: dyenasty18
Subject: 96 Jeep Grand Cherokee Alarm/Remote Start Wiring
Date Posted: April 03, 2010 at 10:10 AM

im tryin to put a pyhton 881xp on the grand cherokee and need the  diagram for the car thanks for the help



Replies:

Posted By: kreg357
Date Posted: April 03, 2010 at 8:11 PM

Here is the info from 12Volt:   https://www.the12volt.com/installbay/alarmdetail/1224.html

Here is the info from Bulldog Security:

GRAND CHEROKEE   1996 -1998 
  
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED / WHITE (+)    IGNITION SWITCH HARNESS 
 STARTER  YELLOW (+)   IGNITION SWITCH HARNESS 
 STARTER 2  N/A  
 IGNITION 1  DARK BLUE/GRAY (+)  IGNITION SWITCH HARNESS
 IGNITION 2  N/A   
 IGNITION 3  N/A    
 ACCESSORY /HEATER BLOWER 1  BLACK/ ORANGE (+) See NOTE *1   IGNITION SWITCH HARNESS 
 ACCESSORY /HEATER BLOWER 2  RED / BLACK (+) See NOTE *1   IGNITION SWITCH HARNESS 
 KEYSENSE  N/A    
 PARKING LIGHTS ( - )  N/A    
 PARKING LIGHTS ( + )  BLUE/RED (+)   @ HEAD LIGHT SWITCH 
 POWER LOCK  ORANGE / VIOLET and PINK/BLACK (TYPE C) See NOTE *2   IN BOTH FRONT DOORS, See DIAGRAM 
 POWER UNLOCK  PINK/BLACK (TYPE C) See NOTE *2   IN BOTH FRONT DOORS, See DIAGRAM 
 DOOR TRIGGER  YELLOW (-)   IN DRIVERS KICK PANEL 
 DOMELIGHT SUPERVISION  TURNS ON with DISARM    
 TRUNK RELEASE  ORANGE / BROWN (+), Requires Part #775 Relay   @ HATCH RELEASE SWITCH 
 SLIDING POWER DOOR  N/A    
 HORN  GRAY/ORANGE (-)   @ STEERING COLUMN HARNESS 
 TACH  GRAY/WHITE   @ PCM, See NOTE *3 
 WAIT TO START LIGHT  N/A    
 BRAKE  WHITE/ TAN (+)   @ SWITCH ABOVE BRAKE PEDAL 
 FACTORY ALARM DISARM   PURPLE / YELLOW (-)   IN DRIVERS DOOR HARNESS 
 ANTI-THEFT  N/A
    
 EXTRA INFORMATION
 NOTE *1 When installing a Remote Starter, BOTH Accessory #1 and #2 wires MUST BE USED!!
 NOTE *2 Use ORANGE / VIOLET for LOCK and PINK/BLACK for UNLOCK at the DRIVERS DOOR SWITCH.
 Use BLACK/ WHITE for LOCK and PINK/BLACK for UNLOCK at the passenger front door switch.
 This vehicle requires (2) of part # 778 one for each door See DIAGRAM. ...
 To avoid installing the relays use an INTERFACE module part no. 455TW. To locate one,
 Google 455TW and click shopping.
 NOTE *3 the PCM (Powertrain Control Module) is located  High on the Passenger side firewall. 



-------------
Soldering is fun!




Posted By: gabedemelo
Date Posted: April 04, 2010 at 3:10 AM
if your not familiar with remote starts, you need to get a module for the doorlocks,... theyre for some reason becoming hard to comeby,.. it is not for beginners no offense will cause all kinds of headaches trust me if not done right not to mention it is pain in ass bigtime to use 4 relays 2 in each door,... o man it sucks i did one like that this winter in freezing garage in MN the doorlocks took longer than rest of remote start by far.

-------------
GreenGables





Print Page | Close Window