need 2007 honda pilot r/s

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122000
Printed Date: May 11, 2025 at 3:37 PM

Topic: need 2007 honda pilot r/s

Posted By: tianot
Subject: need 2007 honda pilot r/s
Date Posted: May 24, 2010 at 11:57 PM

hey guys i need a installation image for 2007 honda pilot if you have one. is it easy to install a r/s for 2007 honda pilot? how can i connect the lock and unlock door to the r/s unit?

thanks

-------------
tianot

Replies:

Posted By: kreg357
Date Posted: May 25, 2010 at 5:49 AM

Here is a link to Bulldog Security web site. You can get the basic wiring guide there. https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp This site also has the wiring gude for your car. Remember these wire listings are only a guide and all wires should be verified with a Digital Multi Meter.

Most Remote Start units directly support the Pilots Type B (-) door locks. Check to see if your unit outputs a (-) negative pulse for Lock and UnLock. The standard .7 second (-) pulse is fine. After locating the correct wires in the car you can directly attach the R/S's lock & unlock wires to the cars wires.

-------------
Soldering is fun!

Posted By: tianot
Date Posted: May 26, 2010 at 1:30 PM

hi! im using the fortin HONDA -SL3 bypass for 2007 honda pilot. do i need to hook up the ignition wire of the r/s unit to the vehicle?

on the installation guide of the HONDA-SL3 bypass, the ignition wire of the vehicle is hook up to the yellow wire of HONDA-SL3. do i need to hook up the ignition wire of the R/S unit to the vehicle?

-------------
tianot

Posted By: kreg357
Date Posted: May 26, 2010 at 8:46 PM

The Fortin Honda SL3 Yellow wire goes to the RED / White ignition wire at the cars Ignition Barrel (same connector as the Security Lamp and Data wire). The R/S's heavy gauge Ignition wire goes to the cars BLACK / YELLOW ignition wire in the ignition switch harness.

-------------
Soldering is fun!

Posted By: tianot
Date Posted: May 27, 2010 at 8:43 AM

thanks bro!

-------------
tianot