2007 chrysler aspen w/nav alpine
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122382
Printed Date: May 18, 2024 at 5:40 PM
Topic: 2007 chrysler aspen w/nav alpine
Posted By: omardesp
Subject: 2007 chrysler aspen w/nav alpine
Date Posted: June 22, 2010 at 12:21 PM
please help !! Just got this truck and am attempting to install an amp. I have ran all wiring except for "remote" I can't find any where I can get this from. Please help...
omar e.
novice (beginner) :(
Replies:
Posted By: 91stt
Date Posted: June 22, 2010 at 2:13 PM
what radio are you using?
-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
Posted By: omardesp
Date Posted: June 22, 2010 at 2:15 PM
I am using the stock REC unit .... with navigation
alpine speakers with subwoofer
also, is there a amp somewhere ? i have all my panels off indes the truck and can't find a thing???
Posted By: 91stt
Date Posted: June 22, 2010 at 3:04 PM
There is no conventional remote turn on wire for this car, it uses data to switch on and off.
The amp should be located in the right kick panel.
You can try a Directed (DEI) 55000, remote power adapter.
I have never used them but it is a possible option.
-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
Posted By: omardesp
Date Posted: June 22, 2010 at 3:58 PM
Thanks ...im going to try to see if i can get a remote signal from the amp first...... if not.... ill try the unit you have mentioned.
Thanks A Lot !!!
-O
Posted By: 91stt
Date Posted: June 22, 2010 at 4:52 PM
There are no switched 12V sources at the amp not headunit.
The only 12V sources are the B+ (constant 12V), yellow/red at the amp and gray/red at the radio.
The amp is turned on by the CAN bus and you will not be able to tap that for your remote turn on.
-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
|