nissan nv200 2010 alarm
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122766
Printed Date: May 07, 2025 at 5:42 AM
Topic: nissan nv200 2010 alarm
Posted By: weaklinks
Subject: nissan nv200 2010 alarm
Date Posted: July 20, 2010 at 4:45 PM
Hi all,
I'm trying to fit an alarm to my new van and can't find the wire to connect the central locking up to the alarm, not sure if it has an alarm module or central locking control unit. Also could anyone give me some info on the where abouts of theese. Looking for the wires for the ignition, +12v and indicators. Have had a look on google to try and find some diagrams but I've had no luck so far, hope someone out there can help.
Replies:
Posted By: howie ll
Date Posted: July 23, 2010 at 2:13 AM
Think Renault
Posted By: weaklinks
Date Posted: July 23, 2010 at 12:26 PM
Think Renault????
Does that mean that the van has been built by Renault?
Posted By: howie ll
Date Posted: July 23, 2010 at 12:52 PM
Probably, the previous Renault/Nissan/Vauxhall were all made at Luton. Just had a look on the web, I'm guessing you will need a CAN alarm else you are going to have a right nightmare. What alarm?
Posted By: weaklinks
Date Posted: July 24, 2010 at 11:49 AM
I've got an alarm that has a pager on it so it can tell me when it's going off, I have managed to wire most of the alarm in to the vehicle, e.g 12v, indicators and the rest that's around the steering column loom, I just can't seem to locate the central locking unit that can activate the door and maybe set the factory fitted alarm.
Posted By: howie ll
Date Posted: July 24, 2010 at 2:46 PM
First question - is there a lock button on the dash or in the door that operates ALL the doors?
Still need to know what brand of alarm.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: weaklinks
Date Posted: July 26, 2010 at 3:18 PM
Hi yes there is a lock button on the dash which locks and unlock the van but it doesn't put the dead lock on it, so when you lock the doors with the switch you can open the doors from the inside, I thought of wiring the alarm from that point but someone could just smalsh the window and open the door from the inside, the make of the alarm that I have installed is an egalemaster E2.
Posted By: howie ll
Date Posted: July 26, 2010 at 4:19 PM
If you can turn the key in the driver's door lock to get deadlocking, there's maybe a wire in the driver's door, though I think this is data.
Otherwise you will need to find a friendly dealer to tell you where the body control module is and tap the deadlock motor wire via a relay, which is what Transits and Transit connects do, hold a 3 second pulse on that wire does the deadlocking, unfortunately I've never heard of this alarm so I don't know if there are any timed aux outputs. That's why I stick to Clifford/Viper, they give me these options.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: weaklinks
Date Posted: July 26, 2010 at 4:38 PM
No looked at that route too, when you turn the drivers door lock it just unlocks the door and not the other doors, the alarm does have aux outputs on it which can be programmed to to several functions, so going with a relay sounds like the best option, I got the van from a main dealer but weather or not they give me the information is another thing, thanks for looking into me post and helping. I'll let you know if I get anywehre with them.
|