viper remote starter issue

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122779
Printed Date: May 03, 2025 at 6:53 PM

Topic: viper remote starter issue

Posted By: jmlewis27
Subject: viper remote starter issue
Date Posted: July 21, 2010 at 11:13 AM

I am installing a viper 5901 remotes start/security system in a 2001 jeep grand cherokee. The H-10 blue/white wire is for - remote start/turbo timer activation input. Says it requires single ground pulse for remote to activate and deactivate. I get a remote start error indicating it is remote start/turbo timer issue. Where do I connect this wire to? What do you suggest guys and gals?

-------------
Crazy ;) Canuck

Replies:

Posted By: kreg357
Date Posted: July 23, 2010 at 8:04 PM

Factory default setting is for (-) Remote Start Activation ( which is ok because I don't think your Jeep is a turbo posted_image ). This wire is not used ( and should be securely taped / insulated ) if you are planning to do remote starts the normal way with the button on the Vipers FOB's.

It could be used as a way to initiate a remote start, if you had another device to send this wire a (-) pulse trigger.

-------------
Soldering is fun!

Print Page | Close Window