2010 honda insight wiring diagram
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123209
Printed Date: July 12, 2025 at 3:10 PM
Topic: 2010 honda insight wiring diagram
Posted By: mally8033
Subject: 2010 honda insight wiring diagram
Date Posted: August 22, 2010 at 8:33 PM
Hello fellow comrades,
I could sure use a diagram for an alarm/remote start system if you have access to it. I greatly appreciate the assistance!
Nate
Replies:
Posted By: icearrow6
Date Posted: August 23, 2010 at 1:32 PM
HONDA
MODEL YEAR(S)
INSIGHT 2010 -
KEY T-HARNESS IMMOBILIZER
N/A N/A HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module, See NOTE #1
PART COLOR LOCATION
12 VOLT CONSTANT WHITE (+) 50 AMP @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 3
STARTER RED (+) @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 1
STARTER 2 N/A
IGNITION 1 YELLOW (+) @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 6
IGNITION 2 N/A
IGNITION 3 N/A
ACCESSORY /HEATER BLOWER 1 ORANGE (+) @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 4
ACCESSORY /HEATER BLOWER 2 RED (+) @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 5
KEYSENSE N/A
PARKING LIGHTS ( - ) GRAY (-) @ HEADLIGHT SWITCH, (BLACK/ WHITE, 12-Pin Plug) Pin 11
PARKING LIGHTS ( + ) GRAY (+) @ DASH FUSE BOX, (LT. GREEN / WHITE, 49-Pin Plug) Pin 42
POWER LOCK GREEN (-) TYPE B @ DASH FUSE BOX, (LT. GREEN, 12-Pin Plug) Pin 8
POWER UNLOCK WHITE (-) TYPE B @ DASH FUSE BOX, (LT. GREEN, 12-Pin Plug) Pin 1
DOOR TRIGGER GRAY (-) @ DASH FUSE BOX, (LT. GREEN / WHITE, 49-Pin Plug) Pin 33
DOMELIGHT SUPERVISION BLUE -) @ DASH FUSE BOX, (LT. GREEN, 8-Pin Plug) Pin 7
TRUNK RELEASE PINK (-) @ DASH FUSE BOX, (LT. GREEN / WHITE, 49-Pin Plug) Pin 17
SLIDING POWER DOOR N/A
HORN ORANGE (-) @ HORN SWITCH, (WHITE, 20-Pin Plug) Pin 1
TACH N/A
WAIT TO START LIGHT N/A
BRAKE WHITE to LT. GREEN (+) @ BRAKE SWITCH or DASH FUSE BOX, (LT. GREEN / WHITE, 49-Pin Plug) Pin 14
FACTORY ALARM DISARM GRAY (-) NOTE #2 @ DASH FUSE BOX, (LT. GREEN, 12-Pin Plug) Pin 4
ANTI-THEFT HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module, See NOTE #1
EXTRA INFORMATION
NOTE #1: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module, Part # PKALL NOTE #2: TEST this wire while turning the Key in the Drivers Door.
-------------
Posted By: mally8033
Date Posted: August 26, 2010 at 12:35 AM
You rock dude~! Expeditious reply...... Couldn't ask for more!
-------------
Nate Dizzle
Posted By: manlucky027
Date Posted: August 29, 2010 at 12:51 PM
how do i find out the number for each pin? for example: the harness has 49pin connector, so which one is pin number 1, number 2, 3,.... etc.
Thanks of helping.
Posted By: icearrow6
Date Posted: August 29, 2010 at 1:40 PM
STARTER RED (+) @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 1
STARTER 2 N/A
IGNITION 1 YELLOW (+) @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 6
Example:
Pin1 BROWN is on the edge of the plug.
Pin6 BROWN will be NOT on the edge. Therefore where the BROWN is on the edge is PIN 1. Count from there.
Better yet.
Find the suspected color wire, and using your DMM test the wire.
-------------
Posted By: howie ll
Date Posted: August 30, 2010 at 8:51 AM
If it's a Siemens/AMP or Molex get out your magnifying glass, the start and end numbers will be etched on, e.g. 1 and 24, 25 and 49.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|